Termination w.r.t. Q proof of /tmp/tmp6F-hrv/ExIntrod_Zan97

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.

↳ QTRS

  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.

Using Dependency Pairs [1,15] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

ZERO(active(X)) → ZERO(X)
ADD(active(X1), X2) → ADD(X1, X2)
ACTIVE(prod(s(X), Y)) → ADD(Y, prod(X, Y))
MARK(p(X)) → ACTIVE(p(mark(X)))
ADD(X1, active(X2)) → ADD(X1, X2)
ADD(mark(X1), X2) → ADD(X1, X2)
ACTIVE(p(s(X))) → MARK(X)
MARK(fact(X)) → FACT(mark(X))
MARK(true) → ACTIVE(true)
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
FACT(active(X)) → FACT(X)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
ACTIVE(prod(s(X), Y)) → PROD(X, Y)
MARK(p(X)) → MARK(X)
PROD(X1, active(X2)) → PROD(X1, X2)
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(zero(X)) → ZERO(mark(X))
MARK(add(X1, X2)) → ADD(mark(X1), mark(X2))
S(active(X)) → S(X)
MARK(false) → ACTIVE(false)
P(active(X)) → P(X)
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
ACTIVE(fact(X)) → P(X)
MARK(zero(X)) → MARK(X)
ACTIVE(zero(0)) → MARK(true)
MARK(prod(X1, X2)) → MARK(X1)
ACTIVE(add(s(X), Y)) → ADD(X, Y)
ACTIVE(zero(s(X))) → MARK(false)
MARK(s(X)) → MARK(X)
PROD(X1, mark(X2)) → PROD(X1, X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
ACTIVE(add(s(X), Y)) → S(add(X, Y))
MARK(add(X1, X2)) → MARK(X2)
P(mark(X)) → P(X)
MARK(fact(X)) → MARK(X)
FACT(mark(X)) → FACT(X)
PROD(mark(X1), X2) → PROD(X1, X2)
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
ADD(X1, mark(X2)) → ADD(X1, X2)
PROD(active(X1), X2) → PROD(X1, X2)
MARK(add(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(fact(X)) → FACT(p(X))
IF(X1, mark(X2), X3) → IF(X1, X2, X3)
ACTIVE(fact(X)) → PROD(X, fact(p(X)))
ACTIVE(prod(0, X)) → MARK(0)
MARK(prod(X1, X2)) → MARK(X2)
S(mark(X)) → S(X)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
MARK(s(X)) → S(mark(X))
MARK(if(X1, X2, X3)) → IF(mark(X1), X2, X3)
ACTIVE(fact(X)) → ZERO(X)
MARK(zero(X)) → ACTIVE(zero(mark(X)))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
MARK(p(X)) → P(mark(X))
ACTIVE(fact(X)) → S(0)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
MARK(0) → ACTIVE(0)
ZERO(mark(X)) → ZERO(X)
ACTIVE(fact(X)) → IF(zero(X), s(0), prod(X, fact(p(X))))
ACTIVE(add(0, X)) → MARK(X)
MARK(prod(X1, X2)) → PROD(mark(X1), mark(X2))
ACTIVE(if(true, X, Y)) → MARK(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

ZERO(active(X)) → ZERO(X)
ADD(active(X1), X2) → ADD(X1, X2)
ACTIVE(prod(s(X), Y)) → ADD(Y, prod(X, Y))
MARK(p(X)) → ACTIVE(p(mark(X)))
ADD(X1, active(X2)) → ADD(X1, X2)
ADD(mark(X1), X2) → ADD(X1, X2)
ACTIVE(p(s(X))) → MARK(X)
MARK(fact(X)) → FACT(mark(X))
MARK(true) → ACTIVE(true)
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
FACT(active(X)) → FACT(X)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
ACTIVE(prod(s(X), Y)) → PROD(X, Y)
MARK(p(X)) → MARK(X)
PROD(X1, active(X2)) → PROD(X1, X2)
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(zero(X)) → ZERO(mark(X))
MARK(add(X1, X2)) → ADD(mark(X1), mark(X2))
S(active(X)) → S(X)
MARK(false) → ACTIVE(false)
P(active(X)) → P(X)
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
ACTIVE(fact(X)) → P(X)
MARK(zero(X)) → MARK(X)
ACTIVE(zero(0)) → MARK(true)
MARK(prod(X1, X2)) → MARK(X1)
ACTIVE(add(s(X), Y)) → ADD(X, Y)
ACTIVE(zero(s(X))) → MARK(false)
MARK(s(X)) → MARK(X)
PROD(X1, mark(X2)) → PROD(X1, X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
ACTIVE(add(s(X), Y)) → S(add(X, Y))
MARK(add(X1, X2)) → MARK(X2)
P(mark(X)) → P(X)
MARK(fact(X)) → MARK(X)
FACT(mark(X)) → FACT(X)
PROD(mark(X1), X2) → PROD(X1, X2)
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
ADD(X1, mark(X2)) → ADD(X1, X2)
PROD(active(X1), X2) → PROD(X1, X2)
MARK(add(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(fact(X)) → FACT(p(X))
IF(X1, mark(X2), X3) → IF(X1, X2, X3)
ACTIVE(fact(X)) → PROD(X, fact(p(X)))
ACTIVE(prod(0, X)) → MARK(0)
MARK(prod(X1, X2)) → MARK(X2)
S(mark(X)) → S(X)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
MARK(s(X)) → S(mark(X))
MARK(if(X1, X2, X3)) → IF(mark(X1), X2, X3)
ACTIVE(fact(X)) → ZERO(X)
MARK(zero(X)) → ACTIVE(zero(mark(X)))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
MARK(p(X)) → P(mark(X))
ACTIVE(fact(X)) → S(0)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
MARK(0) → ACTIVE(0)
ZERO(mark(X)) → ZERO(X)
ACTIVE(fact(X)) → IF(zero(X), s(0), prod(X, fact(p(X))))
ACTIVE(add(0, X)) → MARK(X)
MARK(prod(X1, X2)) → PROD(mark(X1), mark(X2))
ACTIVE(if(true, X, Y)) → MARK(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 8 SCCs with 23 less nodes.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD(active(X1), X2) → ADD(X1, X2)
ADD(X1, active(X2)) → ADD(X1, X2)
ADD(X1, mark(X2)) → ADD(X1, X2)
ADD(mark(X1), X2) → ADD(X1, X2)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD(active(X1), X2) → ADD(X1, X2)
ADD(X1, active(X2)) → ADD(X1, X2)
ADD(X1, mark(X2)) → ADD(X1, X2)
ADD(mark(X1), X2) → ADD(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:

ADD(active(X1), X2) → ADD(X1, X2)
The graph contains the following edges 1 > 1, 2 >= 2
ADD(X1, active(X2)) → ADD(X1, X2)
The graph contains the following edges 1 >= 1, 2 > 2
ADD(X1, mark(X2)) → ADD(X1, X2)
The graph contains the following edges 1 >= 1, 2 > 2
ADD(mark(X1), X2) → ADD(X1, X2)
The graph contains the following edges 1 > 1, 2 >= 2

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(active(X)) → P(X)
P(mark(X)) → P(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(active(X)) → P(X)
P(mark(X)) → P(X)

From the DPs we obtained the following set of size-change graphs:

P(active(X)) → P(X)
The graph contains the following edges 1 > 1
P(mark(X)) → P(X)
The graph contains the following edges 1 > 1

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROD(X1, mark(X2)) → PROD(X1, X2)
PROD(mark(X1), X2) → PROD(X1, X2)
PROD(X1, active(X2)) → PROD(X1, X2)
PROD(active(X1), X2) → PROD(X1, X2)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROD(X1, mark(X2)) → PROD(X1, X2)
PROD(mark(X1), X2) → PROD(X1, X2)
PROD(active(X1), X2) → PROD(X1, X2)
PROD(X1, active(X2)) → PROD(X1, X2)

From the DPs we obtained the following set of size-change graphs:

PROD(X1, mark(X2)) → PROD(X1, X2)
The graph contains the following edges 1 >= 1, 2 > 2
PROD(mark(X1), X2) → PROD(X1, X2)
The graph contains the following edges 1 > 1, 2 >= 2
PROD(X1, active(X2)) → PROD(X1, X2)
The graph contains the following edges 1 >= 1, 2 > 2
PROD(active(X1), X2) → PROD(X1, X2)
The graph contains the following edges 1 > 1, 2 >= 2

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)
S(active(X)) → S(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

From the DPs we obtained the following set of size-change graphs:

S(mark(X)) → S(X)
The graph contains the following edges 1 > 1
S(active(X)) → S(X)
The graph contains the following edges 1 > 1

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ZERO(active(X)) → ZERO(X)
ZERO(mark(X)) → ZERO(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ZERO(active(X)) → ZERO(X)
ZERO(mark(X)) → ZERO(X)

From the DPs we obtained the following set of size-change graphs:

ZERO(active(X)) → ZERO(X)
The graph contains the following edges 1 > 1
ZERO(mark(X)) → ZERO(X)
The graph contains the following edges 1 > 1

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(X1, mark(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(X1, mark(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)

From the DPs we obtained the following set of size-change graphs:

IF(X1, mark(X2), X3) → IF(X1, X2, X3)
The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3
IF(X1, active(X2), X3) → IF(X1, X2, X3)
The graph contains the following edges 1 >= 1, 2 > 2, 3 >= 3
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
The graph contains the following edges 1 >= 1, 2 >= 2, 3 > 3
IF(active(X1), X2, X3) → IF(X1, X2, X3)
The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
The graph contains the following edges 1 > 1, 2 >= 2, 3 >= 3

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

FACT(active(X)) → FACT(X)
FACT(mark(X)) → FACT(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ UsableRulesProof

              ↳ QDP

                ↳ QDPSizeChangeProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

FACT(active(X)) → FACT(X)
FACT(mark(X)) → FACT(X)

From the DPs we obtained the following set of size-change graphs:

FACT(active(X)) → FACT(X)
The graph contains the following edges 1 > 1
FACT(mark(X)) → FACT(X)
The graph contains the following edges 1 > 1

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(X1, X2)) → MARK(X2)
MARK(prod(X1, X2)) → MARK(X1)
MARK(zero(X)) → ACTIVE(zero(mark(X)))
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(p(X)) → ACTIVE(p(mark(X)))
MARK(fact(X)) → MARK(X)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(add(X1, X2)) → MARK(X1)
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(p(X)) → MARK(X)
MARK(zero(X)) → MARK(X)
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(fact(X)) → ACTIVE(fact(mark(X)))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].

The following pairs can be oriented strictly and are deleted.

MARK(zero(X)) → ACTIVE(zero(mark(X)))
MARK(s(X)) → ACTIVE(s(mark(X)))

The remaining pairs can at least be oriented weakly.

MARK(prod(X1, X2)) → MARK(X2)
MARK(prod(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(p(X)) → ACTIVE(p(mark(X)))
MARK(fact(X)) → MARK(X)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(add(X1, X2)) → MARK(X1)
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(p(X)) → MARK(X)
MARK(zero(X)) → MARK(X)
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(fact(X)) → ACTIVE(fact(mark(X)))

Used ordering: Polynomial interpretation [25]:

POL(0) = 0
POL(ACTIVE(x₁)) = x₁
POL(MARK(x₁)) = 1
POL(active(x₁)) = 0
POL(add(x₁, x₂)) = 1
POL(fact(x₁)) = 1
POL(false) = 0
POL(if(x₁, x₂, x₃)) = 1
POL(mark(x₁)) = 0
POL(p(x₁)) = 1
POL(prod(x₁, x₂)) = 1
POL(s(x₁)) = 0
POL(true) = 0
POL(zero(x₁)) = 0

The following usable rules [17] were oriented:

if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
fact(active(X)) → fact(X)
fact(mark(X)) → fact(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
add(X1, mark(X2)) → add(X1, X2)
add(mark(X1), X2) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)
p(active(X)) → p(X)
p(mark(X)) → p(X)

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(X1, X2)) → MARK(X2)
MARK(prod(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(p(X)) → ACTIVE(p(mark(X)))
MARK(fact(X)) → MARK(X)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(add(X1, X2)) → MARK(X1)
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(zero(X)) → MARK(X)
MARK(p(X)) → MARK(X)
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(fact(X)) → ACTIVE(fact(mark(X)))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(p(X)) → ACTIVE(p(mark(X))) at position [0] we obtained the following new rules:

MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(p(true)) → ACTIVE(p(active(true)))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(p(false)) → ACTIVE(p(active(false)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(X1, X2)) → MARK(X1)
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(fact(X)) → MARK(X)
MARK(p(true)) → ACTIVE(p(active(true)))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(add(X1, X2)) → MARK(X1)
ACTIVE(p(s(X))) → MARK(X)
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(prod(X1, X2)) → MARK(X2)
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3)) at position [0] we obtained the following new rules:

MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X1)
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(p(true)) → ACTIVE(p(active(true)))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(prod(X1, X2)) → MARK(X2)
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
ACTIVE(add(0, X)) → MARK(X)
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(prod(X1, X2)) → ACTIVE(prod(mark(X1), mark(X2))) at position [0] we obtained the following new rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(p(true)) → ACTIVE(p(active(true)))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X1)
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(prod(X1, X2)) → MARK(X2)
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(add(X1, X2)) → ACTIVE(add(mark(X1), mark(X2))) at position [0] we obtained the following new rules:

MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(p(true)) → ACTIVE(p(active(true)))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(X1, X2)) → MARK(X1)
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X2)
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(p(true)) → ACTIVE(p(active(true))) at position [0] we obtained the following new rules:

MARK(p(true)) → ACTIVE(p(true))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X1)
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(prod(X1, X2)) → MARK(X2)
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(p(true)) → ACTIVE(p(true))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
ACTIVE(add(0, X)) → MARK(X)
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 1 SCC with 1 less node.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

                                      ↳ QDP

                                        ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
ACTIVE(p(s(X))) → MARK(X)
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
MARK(p(false)) → ACTIVE(p(active(false)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(X1, X2)) → MARK(X1)
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X2)
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(p(false)) → ACTIVE(p(active(false))) at position [0] we obtained the following new rules:

MARK(p(false)) → ACTIVE(p(false))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

                                      ↳ QDP

                                        ↳ Narrowing

                                          ↳ QDP

                                            ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(p(false)) → ACTIVE(p(false))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(prod(X1, X2)) → MARK(X2)
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
ACTIVE(add(0, X)) → MARK(X)
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 1 SCC with 1 less node.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

                                      ↳ QDP

                                        ↳ Narrowing

                                          ↳ QDP

                                            ↳ DependencyGraphProof

                                              ↳ QDP

                                                ↳ Narrowing

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
ACTIVE(p(s(X))) → MARK(X)
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(p(0)) → ACTIVE(p(active(0)))
MARK(zero(X)) → MARK(X)
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(X1, X2)) → MARK(X1)
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X2)
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By narrowing [15] the rule MARK(p(0)) → ACTIVE(p(active(0))) at position [0] we obtained the following new rules:

MARK(p(0)) → ACTIVE(p(0))

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

                                      ↳ QDP

                                        ↳ Narrowing

                                          ↳ QDP

                                            ↳ DependencyGraphProof

                                              ↳ QDP

                                                ↳ Narrowing

                                                  ↳ QDP

                                                    ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(p(0)) → ACTIVE(p(0))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
ACTIVE(p(s(X))) → MARK(X)
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(zero(X)) → MARK(X)
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(add(X1, X2)) → MARK(X2)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(prod(X1, X2)) → MARK(X2)
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
ACTIVE(add(0, X)) → MARK(X)
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 1 SCC with 1 less node.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ Narrowing

                  ↳ QDP

                    ↳ Narrowing

                      ↳ QDP

                        ↳ Narrowing

                          ↳ QDP

                            ↳ Narrowing

                              ↳ QDP

                                ↳ Narrowing

                                  ↳ QDP

                                    ↳ DependencyGraphProof

                                      ↳ QDP

                                        ↳ Narrowing

                                          ↳ QDP

                                            ↳ DependencyGraphProof

                                              ↳ QDP

                                                ↳ Narrowing

                                                  ↳ QDP

                                                    ↳ DependencyGraphProof

                                                      ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MARK(prod(y0, prod(x0, x1))) → ACTIVE(prod(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(if(0, y1, y2)) → ACTIVE(if(active(0), y1, y2))
MARK(if(prod(x0, x1), y1, y2)) → ACTIVE(if(active(prod(mark(x0), mark(x1))), y1, y2))
MARK(prod(y0, zero(x0))) → ACTIVE(prod(mark(y0), active(zero(mark(x0)))))
MARK(prod(if(x0, x1, x2), y1)) → ACTIVE(prod(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(false, y1)) → ACTIVE(add(active(false), mark(y1)))
MARK(add(y0, false)) → ACTIVE(add(mark(y0), active(false)))
MARK(add(y0, s(x0))) → ACTIVE(add(mark(y0), active(s(mark(x0)))))
MARK(if(y0, active(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(add(x0, x1), y1)) → ACTIVE(prod(active(add(mark(x0), mark(x1))), mark(y1)))
ACTIVE(p(s(X))) → MARK(X)
MARK(if(y0, x1, mark(x2))) → ACTIVE(if(mark(y0), x1, x2))
MARK(prod(y0, s(x0))) → ACTIVE(prod(mark(y0), active(s(mark(x0)))))
MARK(prod(false, y1)) → ACTIVE(prod(active(false), mark(y1)))
MARK(prod(y0, false)) → ACTIVE(prod(mark(y0), active(false)))
MARK(if(X1, X2, X3)) → MARK(X1)
MARK(prod(y0, add(x0, x1))) → ACTIVE(prod(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(p(X)) → MARK(X)
MARK(p(prod(x0, x1))) → ACTIVE(p(active(prod(mark(x0), mark(x1)))))
MARK(prod(prod(x0, x1), y1)) → ACTIVE(prod(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(add(y0, add(x0, x1))) → ACTIVE(add(mark(y0), active(add(mark(x0), mark(x1)))))
MARK(fact(X)) → ACTIVE(fact(mark(X)))
MARK(add(add(x0, x1), y1)) → ACTIVE(add(active(add(mark(x0), mark(x1))), mark(y1)))
MARK(add(fact(x0), y1)) → ACTIVE(add(active(fact(mark(x0))), mark(y1)))
MARK(add(zero(x0), y1)) → ACTIVE(add(active(zero(mark(x0))), mark(y1)))
ACTIVE(prod(s(X), Y)) → MARK(add(Y, prod(X, Y)))
ACTIVE(fact(X)) → MARK(if(zero(X), s(0), prod(X, fact(p(X)))))
MARK(if(x0, x1, x2)) → ACTIVE(if(x0, x1, x2))
MARK(add(y0, x1)) → ACTIVE(add(mark(y0), x1))
MARK(add(y0, prod(x0, x1))) → ACTIVE(add(mark(y0), active(prod(mark(x0), mark(x1)))))
MARK(add(x0, y1)) → ACTIVE(add(x0, mark(y1)))
MARK(zero(X)) → MARK(X)
MARK(if(fact(x0), y1, y2)) → ACTIVE(if(active(fact(mark(x0))), y1, y2))
MARK(if(y0, mark(x1), x2)) → ACTIVE(if(mark(y0), x1, x2))
MARK(if(if(x0, x1, x2), y1, y2)) → ACTIVE(if(active(if(mark(x0), x1, x2)), y1, y2))
MARK(prod(s(x0), y1)) → ACTIVE(prod(active(s(mark(x0))), mark(y1)))
MARK(prod(X1, X2)) → MARK(X1)
MARK(p(fact(x0))) → ACTIVE(p(active(fact(mark(x0)))))
MARK(if(zero(x0), y1, y2)) → ACTIVE(if(active(zero(mark(x0))), y1, y2))
MARK(prod(fact(x0), y1)) → ACTIVE(prod(active(fact(mark(x0))), mark(y1)))
MARK(prod(p(x0), y1)) → ACTIVE(prod(active(p(mark(x0))), mark(y1)))
MARK(s(X)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(add(X1, X2)) → MARK(X2)
MARK(fact(X)) → MARK(X)
MARK(prod(y0, if(x0, x1, x2))) → ACTIVE(prod(mark(y0), active(if(mark(x0), x1, x2))))
MARK(prod(y0, x1)) → ACTIVE(prod(mark(y0), x1))
ACTIVE(add(s(X), Y)) → MARK(s(add(X, Y)))
MARK(prod(y0, fact(x0))) → ACTIVE(prod(mark(y0), active(fact(mark(x0)))))
MARK(if(true, y1, y2)) → ACTIVE(if(active(true), y1, y2))
MARK(add(X1, X2)) → MARK(X1)
MARK(if(add(x0, x1), y1, y2)) → ACTIVE(if(active(add(mark(x0), mark(x1))), y1, y2))
MARK(add(prod(x0, x1), y1)) → ACTIVE(add(active(prod(mark(x0), mark(x1))), mark(y1)))
MARK(prod(x0, y1)) → ACTIVE(prod(x0, mark(y1)))
MARK(prod(0, y1)) → ACTIVE(prod(active(0), mark(y1)))
MARK(prod(y0, 0)) → ACTIVE(prod(mark(y0), active(0)))
MARK(p(zero(x0))) → ACTIVE(p(active(zero(mark(x0)))))
MARK(p(s(x0))) → ACTIVE(p(active(s(mark(x0)))))
MARK(prod(X1, X2)) → MARK(X2)
MARK(if(p(x0), y1, y2)) → ACTIVE(if(active(p(mark(x0))), y1, y2))
MARK(add(y0, zero(x0))) → ACTIVE(add(mark(y0), active(zero(mark(x0)))))
MARK(prod(y0, true)) → ACTIVE(prod(mark(y0), active(true)))
MARK(prod(true, y1)) → ACTIVE(prod(active(true), mark(y1)))
MARK(p(if(x0, x1, x2))) → ACTIVE(p(active(if(mark(x0), x1, x2))))
MARK(if(s(x0), y1, y2)) → ACTIVE(if(active(s(mark(x0))), y1, y2))
MARK(p(add(x0, x1))) → ACTIVE(p(active(add(mark(x0), mark(x1)))))
MARK(add(if(x0, x1, x2), y1)) → ACTIVE(add(active(if(mark(x0), x1, x2)), mark(y1)))
MARK(add(s(x0), y1)) → ACTIVE(add(active(s(mark(x0))), mark(y1)))
MARK(p(x0)) → ACTIVE(p(x0))
MARK(p(p(x0))) → ACTIVE(p(active(p(mark(x0)))))
MARK(if(false, y1, y2)) → ACTIVE(if(active(false), y1, y2))
MARK(add(p(x0), y1)) → ACTIVE(add(active(p(mark(x0))), mark(y1)))
MARK(add(0, y1)) → ACTIVE(add(active(0), mark(y1)))
MARK(add(y0, if(x0, x1, x2))) → ACTIVE(add(mark(y0), active(if(mark(x0), x1, x2))))
MARK(add(y0, 0)) → ACTIVE(add(mark(y0), active(0)))
MARK(prod(y0, p(x0))) → ACTIVE(prod(mark(y0), active(p(mark(x0)))))
MARK(add(y0, p(x0))) → ACTIVE(add(mark(y0), active(p(mark(x0)))))
MARK(prod(zero(x0), y1)) → ACTIVE(prod(active(zero(mark(x0))), mark(y1)))
MARK(add(true, y1)) → ACTIVE(add(active(true), mark(y1)))
MARK(add(y0, true)) → ACTIVE(add(mark(y0), active(true)))
ACTIVE(add(0, X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(add(y0, fact(x0))) → ACTIVE(add(mark(y0), active(fact(mark(x0)))))
MARK(if(y0, x1, active(x2))) → ACTIVE(if(mark(y0), x1, x2))

The TRS R consists of the following rules:

active(fact(X)) → mark(if(zero(X), s(0), prod(X, fact(p(X)))))
active(add(0, X)) → mark(X)
active(add(s(X), Y)) → mark(s(add(X, Y)))
active(prod(0, X)) → mark(0)
active(prod(s(X), Y)) → mark(add(Y, prod(X, Y)))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(zero(0)) → mark(true)
active(zero(s(X))) → mark(false)
active(p(s(X))) → mark(X)
mark(fact(X)) → active(fact(mark(X)))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(zero(X)) → active(zero(mark(X)))
mark(s(X)) → active(s(mark(X)))
mark(0) → active(0)
mark(prod(X1, X2)) → active(prod(mark(X1), mark(X2)))
mark(p(X)) → active(p(mark(X)))
mark(add(X1, X2)) → active(add(mark(X1), mark(X2)))
mark(true) → active(true)
mark(false) → active(false)
fact(mark(X)) → fact(X)
fact(active(X)) → fact(X)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
zero(mark(X)) → zero(X)
zero(active(X)) → zero(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
prod(mark(X1), X2) → prod(X1, X2)
prod(X1, mark(X2)) → prod(X1, X2)
prod(active(X1), X2) → prod(X1, X2)
prod(X1, active(X2)) → prod(X1, X2)
p(mark(X)) → p(X)
p(active(X)) → p(X)
add(mark(X1), X2) → add(X1, X2)
add(X1, mark(X2)) → add(X1, X2)
add(active(X1), X2) → add(X1, X2)
add(X1, active(X2)) → add(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.